Compressors diagnostics and purpose
Compressors Diagnostics:
Following diagnostics will be performed on Compressors by using
Windrock 6320 Analyzer:
• Damaged Bearings Identification
• Piston ring/riders condition
• Compressor’ Suction and Discharge Valves malfunction
• Damaged Connecting Rods and wrist pins
• Cross Head and packing defects
• Pressure Volume Curves, Flow balance, Performance Report (If
Pressure Indicators Kiene valves are available)
• Excessive Frame Vibration
• Foundation or Grout damage
• Infrared Temperature Readings
Compressors PURPOSE:
The purpose of Windrock inspection
includes,
• Evaluate performance
• Maximize Machine Efficiency
• Maximize Valve Life
• Maximize Throughput to Horsepower Ratio
• Research and Development
• Economic Evaluation
• Evaluate mechanical condition On-Condition Maintenance
• Insure Reliability and Safety
• Evaluate PM program
• Reduction of Maintenance Costs
• Less Downtime and Lost Production
• Attempt to “Warrant” no Catastrophic Breakdown between
Analyses
Engine diagnostics and purpose
Engine Diagnostics:
Following diagnostics will be performed on Engine by using Wind rock
6320 Analyzer:
• Leaking valves and rings, Worn or Scored Liners
• Defective Fuel Injection valves
• Ignition System deficiencies
• Intake/Exhaust Port or Bridge Wear
• Worn or defective valve train Components
• Turbo charger Defects
• Damaged Bearings Identifications
• Damaged Connecting Rods and wrist pins
• Jacket Water and lube oil pump faults
• Excessive Frame Vibration
• Foundation or Grout Damage
• Engine Oil Test
• Peak Firing Pressure Imbalance (If Pressure Indicators Keene
valves are available)
• Horsepower Discrepancies (If Pressure Indicators Keene valves are
available)
• Infrared Temperature Readings of each cylinders
Engine PURPOSE:
The purpose of Windrock inspection
includes,
• Evaluate performance
• Maximize Machine Efficiency
• Maximize Valve Life
• Maximize Throughput to Horsepower Ratio
• Research and Development
• Economic Evaluation
• Evaluate mechanical condition On-Condition Maintenance
• Insure Reliability and Safety
• Evaluate PM program
• Reduction of Maintenance Costs
• Less Downtime and Lost Production
• Attempt to “Warrant” no Catastrophic Breakdown between Analyses.
